• Email:netcpu@sfjsjx.com
  • Tel:+86 13327316974

Cone Crusher Concave

Main Material: High manganese steel, manganese-chromium alloy (Mn13, Mn13Cr2, Mn18, Mn18Cr2), hard alloy

Casting Technology: Sodium silicate-bonded sand casting and lost foam casting

Applicable Materials: Pebbles, granite, basalt, iron ore, limestone, quartzite, diabase, iron ore, gold ore, copper ore, etc.

Scope of application: Exploitation of mines, exploitation of coal mines,quarry, concrete mixing plant, dry-mixed mortar, power plant desulfurization, quartz sand, etc.

  轧臼壁圆锥破碎机的重要配件,与机架、水平轴、动锥体、平衡轮、偏心套、下破碎壁、液力偶合器、润滑系统、液压系统、控制系统共同构成圆锥破碎机。

  由于轧臼壁是用锌合金浇铸进行连接的,在设备运转一段时间后检查其牢固情况,是否紧固完好。轧臼壁与调整圈的连接是通过U型固定螺钉固定的,在轧臼壁与调整圈中间浇铸锌合金使其紧密结合。更换新的轧臼壁时,一定要注意其固定情况,并在安装完成后,还需要注意运转一段时间后检查其牢固程度,确保其不会松动脱落,可以通过紧拧固定螺钉对其进行固定


常用别名:轧臼壁,破碎壁,动锥衬板,定锥衬板,圆锥机牙板,圆锥破配件

主要材质:高锰钢,锰铬合金(Mn13,Mn13Cr2,Mn18,Mn18Cr2),硬质合金

铸造工艺:水玻璃砂铸和消失模铸造工艺

适用物料:河卵石、花岗岩、玄武岩、铁矿石、石灰石、石英石、辉绿岩、铁矿、金矿、铜矿等

适用设备:圆锥破碎机、圆锥破、圆锥式破碎机、圆锥式粉碎机、圆锥式碎石机、圆锥碎矿机、旋回破碎机等

应用范围:砂石料场、混凝土搅拌站、干粉砂浆、电厂脱硫、石英砂等

Copyright © 2002-2026 XiangJian     E-mail: netcpu@sfjsjx.com    Tel: +86 13327316974    Add: Yuhua District,Changsha City, Hunan Province,China